70-411 Dumps & Test Certification 70-411 Cost - Christmas Offer
                      
Micros oft
70-41 1
Administering Windows Server 2012
  
  
 
https://www.realexamcollection.com/microsoft/70-411-dumps.html
 Up to Date products, reliable and verified.  
 Q uestions and Answers in PDF Format. 
 
Question: 1  
   
DRAG DROP 
Your network contains an Active Directory forest named contoso.com. The forest contains a Network 
Policy Server (NPS) server named NPS1 and a VPN server named VPN1. VPN1 forwards all authentication 
requests to NPS1. 
A partner company has an Active Directory forest named adatum.com. The adatum.com forest contains 
an NPS server named NPS2. 
You plan to grant users from adatum.com VPN access to your network. 
You need to authenticate the users from adatum.com on VPN1. 
What should you create on each NPS server? 
To answer, drag the appropriate objects to the correct NPS servers. Each object may be used once, more 
than once, or not at all. You may need to drag the split bar between panes or scroll to view content. 
 
 
Answer:  
 
 
Question: 2  
HOTSPOT 
Your network contains an Active Directory domain named contoso.com. The domain contains the users 
shown in the following table. 
 
 
You have a Network Policy Server (NPS) server that has the network policies shown in the following 
table. 
 
User1, User2, and User3 plan to connect to the network by using a VPN. You need to identify which 
network policy will apply to each user. 
What should you identify? 
To answer, select the appropriate policy for each user in the answer area. 
 
 
 
Answer:  
 
 
When you configure multiple network policies in NPS, the policies are an ordered list of rules. NPS 
evaluates the policies in listed order from first to last. If there is a network policy that matches the 
connection request, NPS uses the policy to determine whether to grant or deny access to the user or 
computer connection. 
Network policies are evaulated according to the processing order. Once a match is found, no further 
network policy is processed. 
Policies are processed in this order: 
-Policy2 (applies only to members of Group1) 
-Policy1 (applies to all users during specified time slot) 
-Policy3 (applies only to members of Group2) 
Since policy1 will always apply (sunday 0:00 to saturday 24:00 = always), policy3 will never be evaluated. 
Correct answer is : 
User1: Policy2 
User2: Policy1 
User3: Policy1 
https://technet.microsoft.com/en-us/library/cc732724(v=ws.10).aspx 
 
Question: 3 
Your network contains an Active Directory domain named contoso.com. The domain contains a server 
named Server1 that runs Windows Server 2012 R2. 
Server1 has the following role services installed: 
DirectAccess and VPN (RRAS) 
Network Policy Server 
Remote users have client computers that run either Windows XP, Windows 7, or Windows 8. 
You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN 
connections to Server1. 
What should you configure on Server1? 
 
A. A condition of a Network Policy Server (NPS) network policy 
B. A constraint of a Network Policy Server (NPS) network policy 
C. a condition of a Network Policy Server (NPS) connection request policy 
D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy 
 
 
Answer: A     
 
Explanation: 
If you want to configure the Operating System condition, click Operating System, and then click Add. In 
Operating System Properties, click Add, and then specify the operating system settings that are required 
to match the policy. 
The Operating System condition specifies the operating system (operating system version or service 
pack number), role (client or server), and architecture (x86, x64, or ia64) required for the computer 
configuration to match the policy. 
 
Question: 4  
   
HOTSPOT 
Your network contains an Active Directory domain named contoso.com. The domain contains two 
servers named Server1 and Server2. Server1 has the Network Policy Server server role installed. Server2 
has the DHCP Server server role installed. Both servers run Windows Server 2012 R2. 
You are configuring Network Access Protection (NAP) to use DHCP enforcement. 
You configure a DHCP scope as shown in the exhibit. (Click the Exhibit button.) 
 
You need to ensure that non-compliant NAP clients receive different DHCP options than compliant NAP 
clients. 
 
What should you configure on each server? To answer, select the appropriate options for each server in 
the answer area. 
 
 
 
Answer:  
Explanation: 
Health Policies 
Server Options 
* Health policy on the NAP server. 
* The DHCP server must be NAP enabled. 
Note: With DHCP enforcement, a computer must be compliant to obtain an unlimited access IP address 
configuration from a DHCP server. For noncompliant computers, network access is limited by an IP 
address configuration that allows access only to the restricted network. DHCP enforcement enforces 
health policy requirements every time a DHCP client attempts to lease or renew an IP address 
configuration. DHCP enforcement also actively monitors the health status of the NAP client and renews 
the IPv4 address configuration for access only to the restricted network if the client becomes 
noncompliant. 
 
Question: 5 
You are a network administrator of an Active Directory domain named contoso.com. 
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server 
server role and the Network Policy Server role service installed. 
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1. 
You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP clients. 
 
Which criteria should you specify when you create the DHCP policy? 
 
A. The client identifier 
B. The user class 
C. The vendor class 
D. The relay agent information 
 
Answer: B     
 
Explanation: 
 
To configure a NAP-enabled DHCP server 
On the DHCP server, click Start, click Run, in Open, type dhcpmgmt. smc, and then press ENTER. 
In the DHCP console, open \IPv4. 
Right-click the name of the DHCP scope that you will use for NAP client computers, and then click 
Properties. 
On the Network Access Protection tab, under Network Access Protection Settings, choose Enable for this 
scope, verify that Use default Network Access Protection profile is selected, and then click OK. 
In the DHCP console tree, under the DHCP scope that you have selected, right-click Scope Options, and 
then click Configure Options. 
On the Advanced tab, verify that Default User Class is selected next to User class. 
Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for the default 
gateway used by compliant NAP client computers, and then click Add. 
Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP address for each 
router to be used by compliant NAP client computers, and then click Add. 
 
Select the 015 DNS Domain Name check box, and in String value, under Data entry, type your 
organization's domain name (for example, woodgrovebank. local), and then click Apply. This domain is a 
full-access network assigned to compliant NAP clients. 
On the Advanced tab, next to User class, choose Default Network Access Protection Class. 
Select the 003 Router check box, and in IP Address, under Data entry, type the IP address for the default 
gateway used by noncompliant NAP client computers, and then click Add. This can be the same default 
gateway that is used by compliant NAP clients. 
Select the 006 DNS Servers check box, and in IP Address, under Data entry, type the IP address for each 
DNS server to be used by noncompliant NAP client computers, and then click Add. These can be the 
same DNS servers used by compliant NAP clients. 
Select the 015 DNS Domain Name check box, and in String value, under Data entry, type a name to 
identify the restricted domain (for example, restricted. Woodgrovebank. local), and then click OK. This 
domain is a restricted-access network assigned to noncompliant NAP clients. 
Click OK to close the Scope Options dialog box. 
Close the DHCP console. 
Reference: http: //technet.microsoft.com/en-us/library/dd296905%28v=ws.10%29.aspx 
 
Question: 6  
   
HOTSPOT 
Your network contains a RADIUS server named Server1. 
You install a new server named Server2 that runs Windows Server 2012 R2 and has Network Policy 
Server (NPS) installed. 
You need to ensure that all accounting requests for Server2 are forwarded to Server1. 
On Server2, you configure a Connection Request Policy. 
What else should you configure on Server2? To answer, select the appropriate node in the answer area. 
 
 
Answer:  
https://www.realexamcollection.com/microsoft/70-411-dumps.html