Pass4sure 70-743 Dumps Practice Exam Questions - RealExamCollection - 2019
                      
 
 
Micros oft
70-74 3
Upgrading Your Skills to MCSA: Windows Server 2016
 
  
  
https://www.realexamcollection.com/microsoft/70-743-dumps.html
 
 
 
 
Question: 1 
   
HOTSPOT 
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. 
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)- 
capable. 
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. 
The solution must ensure that the virtual machine can use the RDMA capabilities of the network 
adapter cards. 
Which commands should you run first? To answer, select the appropriate options in the answer area. 
 
 
Answer:  
 
 
 
Explanation: 
A new feature of Windows Server 2016 is SET (Switch Embedded Teaming). 
Create a SET team 
You must create a SET team at the same time that you create the Hyper-V Virtual Switch with the 
New-VMSwitch Windows PowerShell command. 
When you create the Hyper-V Virtual Switch, you must include the new EnableEmbeddedTeaming 
parameter in your command syntax. 
In the following example, a Hyper-V switch named TeamedvSwitch with embedded teaming and two 
initial team members is created. 
New-VMSwitch -Name TeamedvSwitch -NetAdapterName "NIC 1","NIC 2" 
-EnableEmbeddedTeaming $true 
References: 
https://technet.microsoft.com/en-gb/library/mt403349.aspx 
 
 
Question: 2 
 
DRAG DROP 
You have a server named Server1 that runs Windows Server 2016. 
You need to deploy the first cluster node of a Network Controller cluster. 
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the 
list of cmdlets to the answer area and arrange them in the correct order. 
 
 
Answer:  
 
 
 
Explanation: 
Deploy Network Controller using Windows PowerShell 
Step 1: Install-WindowsFeature 
Install the Network Controller server role 
To install Network Controller by using Windows PowerShell, type the following commands at a 
Windows PowerShell prompt, and then press ENTER. 
Install-WindowsFeature -Name NetworkController –IncludeManagementTools 
Step 2: New-NetworkControllerNodeObject 
You can create a Network Controller cluster by creating a node object andthen configuring the 
cluster. 
You need to create a node object for each computer or VM that is a member of the Network 
Controller cluster. 
Tocreate a node object, type the following command at the Windows PowerShell command prompt, 
 
and then press ENTER. Ensure that you add values for each parameter that are appropriate for your 
deployment. 
New-NetworkControllerNodeObject –Name  -Server -FaultDomain -RestInte 
Step 3: Install-NetworkControllerCluster 
To configure the cluster, typethe following command at the Windows PowerShell command prompt, 
and then press ENTER. Ensure that you add values for each parameter that are appropriate for your 
deployment. 
Install-NetworkControllerCluster –Node  –ClusterAuthentication … 
Step 4: Install-NetworkController 
To configure the Network Controller application, type the following command at the Windows 
PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter 
that are appropriate for your deployment. 
Install-NetworkController –Node  –ClientAuthentication 
References: https://technet.microsoft.com/en-us/library/mt282165.aspx 
 
Question: 3 
 
You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 
2016. 
You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies. 
Which component must you install for the planned deployment? 
 
A. the Routing role service 
B. the Canary Network Diagnostics feature 
C. the Network Controller server role 
D. the Data Center Bridging feature 
 
Answer: C     
 
Explanation: 
Using Windows PowerShell, the REST API, or a management application, you can use Network 
Controller to manage the following physical and virtual network infrastructure: 
References: https://technet.microsoft.com/en-us/library/dn859239.aspx 
 
Question: 4 
   
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that 
requires high network throughput. 
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has 
one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the 
Single Root I/O Virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling 
(RSS). 
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. 
Which Windows PowerShell command should you run on the host of VM1? 
 
 
A. Set-NetAdapterRss 
B. Set-NetAdapterRdma 
C. Set-NetAdapterSriov 
D. Set-NetAdapterQoS 
 
Answer: A     
 
Explanation: 
The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on a network adapter. 
RSS is a scalability technology that distributes the receive network traffic among multiple processors 
by hashing the header of the incoming packet. Without RSS Windows Server 2012/2016; network 
traffic is received on the first processor which can quickly reach full utilization limiting receive 
network throughput. Many properties can be configured using the parameters to optimize the 
performance of RSS. The selection of the processors to use for RSS is an important aspect of load 
balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS. 
 
Question: 5 
   
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that 
hosts a virtual machine named VM1. 
Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, 
vSwitch2 and vSwitch3. 
You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.) 
 
 
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails 
on Server1. 
What should you do? 
 
A. From Hyper-V Manager on Server1, modify the settings of VM1. 
B. From Windows PowerShell on VM1, run theSet-VmNetworkAdapterTeamMapping cmdlet. 
C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration 
cmdlet. 
D. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet. 
 
Answer: A     
 
 
Explanation: 
You can configure NIC teaming in the Guest OS; however, before NIC teaming will work in a virtual 
machine, you need to enable NIC teaming in the Advanced Features section of the VM settings. 
 
Question: 6 
   
HOTSPOT 
You have an Active Directory domain named Contoso.com. The domain contains Hyper-V hosts 
named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use 
NVGRE for network virtualization. 
You have six virtual machines that are connected to an external switch. The virtual machines are 
configured as shown. 
 
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the 
appropriate options in the answer area. 
 
 
Answer:  
 
 
 
 
Explanation: The GRE keys must match. 
To separate the traffic between the two virtualized networks, the GRE headers on the tunneled 
packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network. 
References: 
https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-
networkvirtualization- 
31-days-of-favorite-features-in-winserv-2012-part-8-of-31/ 
 
Question: 7 
 
You have a Nano Server named Nano1. 
You deploy several containers to Nano1 that use an image named Image1. 
You need to deploy a new container to Nano1 that uses Image1. 
What should you run? 
 
A. the Install-WindowsFeature cmdlet 
B. the docker run command 
C. the docker load command 
D. the Install-NanoServerPackage cmdlet 
 
Answer: B     
 
Explanation: 
When an operator executes docker run, the container process that runs is isolated in that it has its 
own file system, its own networking, and its own isolated process tree separate from the host. 
The basic docker run command takes this form: 
$ docker run [OPTIONS] IMAGE[:TAG|@DIGEST] [COMMAND] [ARG...] 
 
Question: 8 
 
   
You have a server named Server1 that runs Windows Server 2016. 
You plan to deploy Internet Information Services (IIS) in a Windows container. 
You need to prepare Server1 for the planned deployment. 
Which three actions should you perform? Each correct answer presents part of the solution. 
 
A. Install the Container feature. 
B. Install Docker. 
C. Install the Base Container Images. 
D. Install the Web Server role. 
E. Install the Hyper-V server role. 
 
Answer: A,B,C     
 
Explanation: 
Step 1 (A): The container feature needs to be enabled before working with Windows containers. To 
do so run the following command in an elevated PowerShell session. 
Enable-WindowsOptionalFeature -Online -FeatureName containers –All 
Step 2 (B): Docker is required in order to work with Windows containers. 
Note: First install the OneGet PowerShell module. 
Install-Module -Name DockerMsftProvider -Repository PSGallery -Force 
Next you use OneGet to install the latest version of Docker. 
Install-Package -Name docker -ProviderName DockerMsftProvider 
Step 3 (C): Install Base Container Images 
Windows containers are deployed from templates or images. Before a container can be deployed, a 
container base OS image needs to be downloaded. The following commands will download the Nano 
Server base image. 
Pull the Nano Server base image. 
docker pull microsoft/nanoserver 
 
Question: 9 
   
You have a Hyper-V host named Server1 that runs Windows Server 2016. 
Server1 has a virtual machine named VM1. VM1 is configured to run the Docker daemon. 
On VM1, you have a container network that uses transparent mode. 
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP. 
What should you do? 
 
A. On VM1, run docker network connect. 
B. On Server1, run docker network connect. 
C. On VM1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter – 
MacAddressSpoofing On. 
D. On Server1, run Get-VMNetworkAdapter –VMName VM1 | Set-VMNetworkAdapter – 
MacAddressSpoofing On. 
 
https://www.realexamcollection.com/microsoft/70-743-dumps.html