How to Demolish a Pool
                     How To Demolish a Pool
  
Drain the Pool
First step to any pool demolition is to drain the pool if it is 
not already empty. It is easy to drain a pool by using a 
submersible pump.
  
Punch Holes
Make sure that you do not 
need any special permits 
to demolish the pool. 
Disconnect any gas lines 
or electrical wiring. Jack 
hammer large holes into 
the bottom of the pool 
about two feet in radius. A 
typical pool will need about 
three to four holes.
  
 Remove the Wall
It is not easy to 
break pool walls and 
you may have to 
bring in a jack 
hammer to get the 
job done. The top 
two feet of concrete 
and reinforced steel 
will need to be 
removed.
  
Backfill with Sand and Dirt
Fill the pool with sand and dirt. Then compact it down 
periodically. Do some research on the soil in your area, 
once you know what soil will work best, you can start 
adding that soil until it is completely filled and compacted 
up to grade level.
  
Add Topsoil
Make sure that the last couple of inches of the pool are 
filled with topsoil. This step is especially important if you 
are going to landscape or have a garden. The general rule 
of thumb is for a vegetable garden you need 8-12 inches 
of topsoil, raised plants need 12-18 inches of topsoil and a 
lawn only requires 4-6 inches of topsoil.
  
Contact Us
● Address :- Sydney, NSW, Australia
● Phone No :- (02) 9579 5186
● Website :- http://chomp.com.au