ISS-003
                     CompTIA
Exam ISS-003
Intel® Server Specialist Certification Exam
Verson: Demo
[ Total Questions:   10 ]
https://www.realexamcollection.com/comptia/iss-003-dumps.html
Question No : 1
An Intel® Server Specialist is helping a customer configure their RAID using the Intel®
RAID Web Console. The Specialist advises the customer to use Auto-Configuration Mode
as it automatically creates the best possible RAID-configuration for the available hardware.
Which of the following configurations are NOT supported using this mode? (Select ALL that
apply).
 
A. Auto Configuration cannot be used when using more than one backplane. 
B. Auto Configuration cannot be used with SSD drives. 
C. Auto Configuration cannot be used for RAID 10, 50, or 60. 
D. Auto Configuration cannot be used for creating RAID on 2 HDDs. 
E. Auto Configuration cannot be used with mixed SATA and SAS drives. 
 
Answer: C,E
 
 
Question No : 2
Your customer has a dual socket server board; and they have complained to you that their
customer is constantly getting PCIe errors. At yourrequest they send you the System Event
log. On investigation of the SEL by you, you discover some events that look like the
following:
 
TimeStamp:03/05/2014 12:18:41 SensorName:PCIe Cor Sensor. Bus:0, device:3,
function:2
 
Which one of the following represents the correct order in which troubleshooting should
occur?
 
 
A. If error happens very rarely, disable AER reporting in BIOS 
B. Check SEL troubleshooting guide in order to understand PCIe bus, device, function of
the card that generates the error. Then check TPS to identify the slot to find the suspect
component. 
C. List through the error codes from the User guide to find the translation table for the SEL
in order to identify the failing device and link speed. 
D. Force slower PCIe link speeds in the BIOS setup utility. 
E. If the error happens regularly, try to cross-test PCIe devices to see if the error follows
the card or stays with the slot. 
F. Rerun the FRU/SDR to force the system to detect the correct PCIe generation for this
device. 
G. A, B, E 
H. A, D, C 
I. A, F, E 
2
J. B, C, F 
 
Answer: A
 
 
Question No : 3
Your customer is buying a new server and due to space constraints it needs to enable
maximum storage as well. The minimum acceptable number of drives is at least 20 HDDs
so that securearrays may be created. Please choose your answer from the list below:
 
A. Intel ® Compute Module HNS2600TP & Intel® Server Chassis H2216XXKR2 
B. Intel ® Server System R1304WTXXX 
C. Intel ® Server System R2224WTTYS 
D. Intel ® Server System R1208WTXXX 
 
Answer: C
 
 
Question No : 4
In discussions with your customer about their requirements for storage in an existing server
installation, you are asked what is the maximumnumber of drives that may be controlled by
the Intel® Raid Module RMS3CC080? Please choose your answer from the list below.
 
A. 8 Drives 
B. 32 Drives 
C. 80 Drives 
D. 128 Drives 
E. 256 Drives 
 
Answer: D
 
 
Question No : 5
Which of the following components can be added to the Intel® Server System
R2208WTTYS with the RMS3CC080 to improve the RELIABILITY of the system? (Select
ALL that apply).
 
A. AXXRMM4R 
B. A2U8X25DPDK 
3
C. AXXRMFBU5 
D. A2UBKTMFBUSSD 
E. AXX1100PCRPS 
 
Answer: C,E
 
 
Question No : 6
Your customer has asked you – the Intel® Server Specialist– for confirmation onthe
process following changes to their server (additional memory, a different raid card and a
40Gb Ethernet card)? What must they do to ensure accurate monitoring of all the sensors
in their S2600WT based server?
 
A. The FRU/SDR must be updated with the latest master.cfg to enable the new hardware
to be detected. 
B. They don’t need to do anything - the current firmware will auto-configure. 
C. The ME must be updated prior to use of the master.cfg and then the FRUSDR update
may be carried out. 
D. Only the FRUneeds to be updated as the SDR now auto-configures 
E. Only the SDR needs to be updated as the FRU auto-configures. 
 
Answer: B
 
 
Question No : 7
A customer asks which technologies are supported in Intel® Server Chipsets. How should
an Intel® Server Specialist respond from the following options?
 
A. Intel® Virtualisation Technology for Directed I/O 
B. Intel® Virtualisation Technology for Connectivity 
C. Intel®Virtualisation Technology for Routing 
D. Virtual Machine Device Queues 
 
Answer: A
 
 
Question No : 8
What is the correct method of connecting the SGPIO cable to two HSBPs in the current
generation server systems? How would you answer from the list below?
4
A. In the current generation platform the HSBP does not need an SGPIO 
B. In the current generation platform the SGPIO is integrated within the data cables 
C. The first HSBP connects with an SGPIO cable to the system board, the second HSBP
connects via SGPIO cable to the first HSBP 
D. One HSBP connects via SGPIO cable to the system board, the other HSBP connects
via SGPIO cable to the RAID controller 
E. Each HSBP connects with its own cable to the system board 
 
Answer: C
 
 
Question No : 9
You are educating your customer on the benefits of server management as a way of
adding value and revenue to their business. You are now discussing how accessing a
customer’s server remotely can save both time and money, and potentially generate an
income stream for the business. You have given advice on the different tools used for
getting all of the events from a managed Intel® server. Are there any tools in the list below
that do NOT allow the SEL to be read remotely?
 
A. You cannot read the SEL through the Intel® Active system console 
B. You cannot read the SEL through the CmdTool2 
C. You cannot read the SEL through the IPMI Tool/IPMI Utility 
D. You cannot read the SEL through the BMC web-GUI 
 
Answer: B
 
 
Question No : 10
Which of the following is the function of the command ‘FS0:\SUP> frusdr.efi /d sdr’?
 
A. Display SDR records 
B. Update FRUSDR for server system 
C. Delete SDR records from server system 
D. Downgrade SDR version 
 
Answer: A
 
 
https://www.realexamcollection.com/comptia/iss-003-dumps.html
5