It is the best decisions for IT candidates if they download MTCNA dumps at the right time. If you are going to appear in MTCNA - MikroTik Training you can start your preparation without any further delay. To get the best possible grades in your final exam, you just have to read MTCNA questions and answers carefully and thoroughly. It is not a big task to get distinctive grades with this unique study guide. You can get an estimation of the stuff from free of cost demo version. Your satisfaction is foremost priority so you are given money back guarantee at Realexamcollection. If you remain unsuccessful in getting your desired grades after fair preparation from MTCNA dumps. Follow all the instructions and use online practice test to polish your abilities according to the exam requirements. There is nothing now that can hinder your way to success.https://www.realexamcollection.com/mikrotik/mtcna-dumps.html
(PDF) New MTCNA PDF Dumps - Realexamcollection
MikroTik
MTCNA
Version: Demo
[ Total Questions: 10]
https://www.realexamcollection.com/mikrotik/mtcna-dumps.html
Practice Exam MikroTik - MTCNA
Question #:1
Which of the following is the decimal and hexadecimal equivalents of the binary number 10011101?
A. 155, 0x9B
B. 157, 0x9D
C. 159, 0x9F
D. 185, 0xB9
Answer: B
Question #:2
If your router is facilitating a CSU/DSU, which of the following commands do you need to use to provide the
router with a 64000bps serial link?
A. RouterA(config)#bandwidth 64
B. RouterA(config-if)#bandwidth 64000
C. RouterA(config-if)#clock rate 64
D. RouterA(config-if)#clock rate 64000
Answer: D
Question #:3
A network ready device is directly connected to a MikroTik RouterBOARD 750 with a correct U.T.P. RJ45
functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of
255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to
the device?
A. 192.168.100.69/255.255.255.252
B. 192.168.100.70/255.255.255.252
C. 192.168.100.71/255.255.255.252
D. 192.168.100.68/255.255.255.252
Answer: A
Practice Exam MikroTik - MTCNA
Question #:4
How many wireless clients can connect, when wireless card is configured to mode=bridge?
A. 1
B. 100
C. 2007
D. 2
Answer: A
Question #:5
You would like to allow multiple logins with one user name on a Hot-Spot server. How should this be
configured?
A. Set "Shared Users" option at /ip Hot-Spot user profile
B. It's not possible
C. Set "Shared Users" option at /ip Hot-Spot
D. Set "only-one=no' at /ip Hot-Spot
Answer: A
Question #:6
How many DHCP servers can be configured per interface on RouterOS?
A. Five
B. One
C. Two
D. Unlimited
Answer: B
Question #:7
The highest queue priority is
A. 1
Practice Exam MikroTik - MTCNA
B. 256
C. 16
D. 8
Answer: A
Question #:8
/interface wireless access-list is used for
A. Handles a list of Client's MAC Address to permit/deny connection to AP
B. Shows a list of Client's MAC Address that are already registered at AP
C. Contains the security profiles settings
D. Authenticate Hot-Spot users
Answer: B
Question #:9
Which protocol does DHCP use at the Transport layer?
A. IP
B. TCP
C. UDP
D. ARP
Answer: C
Question #:10
Where can you monitor (see addresses and ports) real-time connections which are
processed by the router?
A. Firewall Connection Tracking
B. Firewall Counters
C. Tool Torch
Practice Exam MikroTik - MTCNA
D. Queue Tree
Answer: A C
https://www.realexamcollection.com/mikrotik/mtcna-dumps.html
Comments