2019 Up to Date HP  HPE6-A49 Dumps PDF with 100% Passing  Guarantee
                     HP HPE6-A49 Exam Dumps 
Aruba Certified Design Expert 8 Written Exam
FOR MORE INFO
https://www.realexamdumps.com/hp/hpe6-a49-practice-test.html
 
Question: 1 
   
Refer to the exhibits. 
Exhibit 1. Existing wiring plan: 
 
Exhibit 2. Current proposal: 
 
A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the 
uplink bandwidth out of each closet. The building writing plan is shown in Exhibit 1. The customer will 
not consider any cable upgrades at this point. The current proposal is shown in Exhibit 2. 
 
Question: 1 
   
Refer to the exhibits. 
Exhibit 1. Existing wiring plan: 
 
Exhibit 2. Current proposal: 
 
A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the 
uplink bandwidth out of each closet. The building writing plan is shown in Exhibit 1. The customer will 
not consider any cable upgrades at this point. The current proposal is shown in Exhibit 2. 
 
Which correction must architect make to the proposal to meet the customer requirements? 
 
A. Change the SR transceivers for each link between the writing closet switches and the network core to 
LRM transceivers. 
B. Add an aggregation layer, and connect writing closet switches to the aggregation layer on Smart Rate 
ports. 
C. Add an aggregation layer, and connect writing closet switches to the aggregation layer with SFP+ SR 
transceivers. 
D. Add a mode conditioning cable for each link between the writing closet switches and the network 
core. 
 
Answer: D     
 
Question: 2 
   
What is one customer requirement that can drive the need for a relatively dense AP deployment, in 
which the coverage areas of at least three AP radios overlap? 
 
A. support for beacon management 
B. AP operation as hybrid AMs for IDS/WIPS 
C. the deployment of dual 5GHz radio APs 
D. location tracking of wireless IoT devices 
 
Answer: D     
 
Question: 3 
   
Refer to the exhibit. 
 
 
An architect has planned the wireless and wired access layers for a network upgrade. The entire solution 
must support 9,000 wireless devices and 2,250 wired endpoints. 
The campus core must meet these requirements: 
no more than 4:1 oversubscription on the links to the data center  
switch-level redundancy  
near instant failover if one core switch fails  
link aggregations between access layer and core  
same switch software used across the entire campus  
Which exhibit shows a campus core that meets the customer needs? 
 
 
 
 
 
 
A. Option A 
B. Option B 
C. Option C 
D. Option D 
 
Answer: B     
 
Question: 4 
   
A customer has an existing Aruba network, which currently supports up to 9,000 wireless client devices. 
The existing network includes these components: 
Four 7210 MCs  
Five 7030 MCs  
200 AP-303HRs  
300 AP-345s  
The customer wants to convert to an ArubaOS 8.x architecture. The architect plans to deploy a virtual 
MM. 
 
Which exhibit shows the correct BOM for the MM? 
 
 
 
 
A. Option A 
 
B. Option B 
C. Option C 
D. Option D 
 
Answer: C     
 
Question: 5 
   
A customer has multiple medium and large branch sites, each of which requires between 8 and 16 APs 
and supports between 200 and 600 wireless clients. Every branch site has an internet connection, which 
it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the 
solution. 
Each side handles between 1 and 2 Gbps of traffic, most of which goes to the central data center. The 
data center has 7210 controllers for terminating the VPN connections. 
Which branch office solution best meets the customer needs? 
 
A. CAPs and branch office controllers with an SD-WAN license 
B. IAPs and no branch office controllers 
C. CAPs and branch office controllers 
D. RAPs and no branch office controllers 
 
Answer: B     
 
Question: 6 
   
 
 
 
 
A hospital needs an upgrade to 802.11ac for its wireless network. The wireless network supports: 
wireless medical devices  
medical staff voice communicators  
laptops in nurse stations  
medical staff tablets  
visitor and patient personal devices  
 
All of these devices support both the 2.4GHz and 5GHz band. Assuming about a max throughput of 150 
Mbps per AP, the hospital would like to support about 4 Mbps per client. 
The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital 
expects will need to support about 800 wireless devices. The exhibits show heatmaps from this plan. The 
architect also plans to deploy APs in stairwells between floors. 
How well does the plan meet the requirements? 
 
A. The current AP placement fails to account for the lead-lined walls that are common in patient and 
exam rooms. 
B. The current AP placement fails to provide adequate signal for the voice communicators in several 
areas. 
C. The current AP placement meets coverage requirements, but does not meet capacity requirements. 
D. The current AP placement meets the customer requirements in terms of coverage and capacity. 
 
Answer: D     
 
 
All of these devices support both the 2.4GHz and 5GHz band. Assuming about a max throughput of 150 
Mbps per AP, the hospital would like to support about 4 Mbps per client. 
The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital 
expects will need to support about 800 wireless devices. The exhibits show heatmaps from this plan. The 
architect also plans to deploy APs in stairwells between floors. 
How well does the plan meet the requirements? 
 
A. The current AP placement fails to account for the lead-lined walls that are common in patient and 
exam rooms. 
B. The current AP placement fails to provide adequate signal for the voice communicators in several 
areas. 
C. The current AP placement meets coverage requirements, but does not meet capacity requirements. 
D. The current AP placement meets the customer requirements in terms of coverage and capacity. 
 
Answer: D