What Is Snaking a Drain?
                     What Is Snaking a Drain?
Some clogs refuse to go away until you use a snaking device to remove them. A
drain snake is a helpful device for many plumbers in Sacramento to get your drain
flow back and remove that stubborn clog obstructing your drain. A drain snake is a
spiral shape tool, and it is usually about 1/4-inch thick with a handle on one end. 
Blockages such as sink clogs, bathroom clogs, kitchen clogs, and toilet clogs are
cleared using drain snakes. You can buy a 50 or 35-foot drain snake if you are in the
market for purchasing a drain snake. These heights of drain snakes can remove
most typical clogs.
Keep reading to know more about drain snaking and learn why it is an 
effective method:
When is a drain snake used?
Plumbers use drain  snakes to  tackle severe roots,  grease,  and serious clogs in
drains and pipes. The winding part of this tool snatches the messy obstruction and
pulls it out with it. Your plumber will repeat this process until the drain is clear from
blockages or clogs.
A plumber will typically use this tool if you have a kitchen, bathroom, toilet, or sink
clogged. Drain snakes are mainly used for smaller drains, while drain augers are
designed to operate on large pipes. A Drain snake and drain auger are some of the
best tools a plumber uses for drain cleaning in Sacramento.
How it is used
A plumber will take a drain snake or plumber snake and press it against the clogged
drain.  Next,  the blockage will  be picked up, and the messy obstruction that  was
causing the clog will be cleared away.
The drain snake’s head is inserted into the affected drain, and then it is rotated to
grab the blockages to pull it eventually.
Drain  snaking is  one of  the effective  drain  cleaning methods that  will  give  free-
flowing drains. Here are the benefits you can reap if you have the following types of
plumbing issues:
 Recurring clogs
 Slow drains
 Odors coming from drains
 Greasy clogs
How to use a drain snake yourself.
Using this is easy. You need to read the operating instructions mentioned by the
dealer.
Here is the step-by-step process:
 Insert the coiled end of the snake into the drain opening.
 You have to keep inserting or pressing the snake until you feel the obstruction.
 Crankle the handle and apply more pressure to get a tight hold under the drain.
 Once you  have  done so,  you  will  smack  the  snake  on  the  surface  of  the
obstruction as you slide on it.
 Rotate the drain snake against the obstruction. Rotating will help in getting the
blockage  attached.  So,  next,  you  have  entangled  the  backup  through  the
snake; it’s time to pull the snake out of the drain.
 That’s it. You have cleared the clog. Pour hot water into the drain to ensure no
clog is left, as sometimes, the clog may get down the drain.
If  you want  a  professional  company’s  help  to  clear  your  drain,  you can  hire  an
experienced drain cleaning and water heater repair Sacramento service to address
your clogged drain issue.
----- Source -----
https://evedonusfilm.com/what-is-snaking-a-drain/