What Tips Help You to Fix a Slow Draining Bathroom Sink Problems?
                     How to Clear a Slow Bathroom Sink Drain?
One of the most common plumbing problems is a slow bathroom sink drain. It occurs
due to several reasons. For instance, when you use the sink daily, a lot of hair and
debris  collect.  Similarly,  soap and other  products  washed down in the drain  can
accumulate. Such a build-up reduces the size of the drain, eventually slowing the
speed of draining water. Many plumbers in San Jose provide professional services
at your doorstep to help resolve the issue and give you drains that run smoothly. 
It isn’t difficult to find the best way to unclog a sink. If your bathroom sink drains
slowly, use the steps suggested below to fix your problem. 
1. Boiling Water
Several ways help to clear a clogged bathroom sink. Depending on the severity of
your problem, you can try the different options one by one. Start with the easiest one,
which requires only a few household items. Boiling water is a suitable solution for
sinks that are not made of porcelain. 
 Before you start, make sure the sink has drained completely. Do not use the
sink for a few hours before trying this remedy. 
 Bring a pot of water to a rolling boil. 
 Slowly pour the water into the drain. The clog will start to clear immediately,
and you will be able to pour the rest of the water without filling the basin. 
 Let the water drain completely. You can repeat the process if the sink does not
start draining. 
You can also use hot water from the water heater after completing a professional
water  heater  installation  in  San  Jose.  If  the  drain  remains  slow  even  after
repeating the process, use an alternate method. 
2. Baking Soda and Vinegar
Baking soda and vinegar help in clearing stubborn drains. It is a safe and household-
friendly solution compared to chemical-based drain openers available in the market. 
 Take ¼ cup of baking soda. Pour it into the sink using a funnel. 
 Use the same funnel to pour 1 ¼ cup of white vinegar into the drain. 
 Plug the drain with a sink stopper. You can use a towel if you don’t have a sink
stopper.
 Leave the mixture for around 20 minutes,  after which you can pour boiling
water. 
 Repeat the steps if required. 
3. Plunger
Most homeowners have a plunger at home. For this method, you will require a small
plunger. 
 Remove  the  top  of  the  sink  stopper  or  the  hole  cover  by  pulling  up  or
unscrewing the stopper to the left. 
 Do not fill the basin to the top, but leave about an inch of water in it. 
 Place the plunger in the middle of the drain and apply force to create a strong
seal. 
 For the next 15 seconds, pump the plunger up and down. 
 The water will start draining after you remove the plunger. 
Conclusion
This  problem  of  slow  drains  occurs  naturally  over  time,  and  most  homeowners
cannot  avoid  the  same.  The  ideal  solution  to  tackle  the  concern  is  scheduling
periodic drain cleaning in San Jose. 
----- Source -----
https://selfieoo.com/read-blog/79251_how-to-clear-a-slow-bathroom-sink-drain.html