What Should You Do If Your Water Heater Fails?
                     What Should You Do if Your Hot Water Heater Breaks Down?
Modern  water  heaters  are  long-lasting.  Unlike  appliances  such  as  dishwashers  and
washing  machines,  the  water  heater  in  your  home  is  for  daily  use.  However,  the
components installed in a water heater sometimes work too hard, eventually breaking
down. When you rely on hot water for cooking, cleaning, and bathing, a minor issue can
bring your life to a standstill. Calling an expert for  water heater repair in  San Jose  is
the right decision. Many problems are easy-to-handle, and the key to fixing them is
identifying the cause. Quick diagnosis and repair can save you from a potentially big
hassle.
Here are common problems and solutions.
1. Low Hot Water Supply
A lack of warm water could indicate sediment build-up in your water tank. Minerals
such as magnesium and calcium will begin to collect in the water heater base as it nears
the end of its life cycle. More the amount of minerals less will be the space to store
water in the heater. Flushing your water heater to remove the excess minerals  should
solve the problem.
2. Too Hot Water
The reason behind this could be the high thermostat setting. The good news is it is easy
to fix. Simply turn down the thermostat. However, if the problem persists, check the
temperature pressure valve. If it is broken, the heater will not shut off when it reaches
the correct temperature. Since it could be dangerous to change the valve, you should
call the best  plumbers in  San Jose .
3. Leaks
The following problems may cause water leaks:
 a faulty temperature and pressure (T&P) relief valve
 irregular water pressure
 overheating
 a stuck valve
 plumbing connection fault
 loose or damaged heating element bolts
 a bad gasket
 a leaking water tank
To resolve this, you can tighten the loose plumbing connection. Next, look for loose
heating element bolts  and tighten them if  necessary.  If  the heating element leakage
continues,  you  may  need  the  gasket  replacement,  for  which  expert  assistance  is
mandatory. Finally, look for leaks on or around the storage tank. Since storage tanks
corrode from the inside, you may probably need a water heater replacement.
Related Articles:
How to Care for Your Water Heater?
4 Tell-tale Signs Your Water Heater System Is Near To Its Failure
4. Water Discoloration or odor
Rusty water could be the sign of a corroding tank's inner lining, which is frequently
caused  by  a  malfunctioning  anode  rod.  As  a  result,  discolored  water  flows.  Also,
deteriorated  anode  rode  cause  cracks,  resulting  in  leaks.  Moreover,  a  decaying
sacrificial anode rod emits hydrogen, causing a smell like rotten eggs. You can also
check for loose plumbing connections that can be tightened using an element wrench.
Consult  a skilled water heater expert  to see whether changing the anode rod would
resolve the issue; if not, you may need a water heater replacement.
Conclusion
Although you can try to fix the tank using these tips, it is advised to contact an expert
for major issues. Attempting to fix a leaking water heater could be dangerous. Consult a
plumbing company in San Jose for various water heater issues, such as malfunctioning
gas valves, broken heating elements, or cracked dip tubes.
Article Source:
https://www.emergencyplumbersca.com/what-should-you-do-if-your-hot-water-heater-breaks-down/