HP HPE6-A45 Dumps - Here's What No One Tells You about HPE6-A45 Dumps
                     HP HPE6-A45 Dumps PDF
Implementing Aruba Campus Switching Solutions Exam 
For More Information:
https://www.dumps4download.com/hpe6-a45-dumps.html
 
 
Question: 1 
     
A network administrator configures DHCP snooping on VLAN 2. How does the switch handle DHCP traffic 
that arrives in this VLAN on an untrusted interface? 
 
A. It accepts packets from a DHCP server, but drops client packets. 
B. It drops all DHCP traffic and logs a security event. 
C. It accepts both client and server packets as long as they match the DHCP binding table. 
D. It accepts client packets, but drops packets from a DHCP server. 
 
Answer: D     
 
DHCP snooping only allows DHCP client traffic on an untrusted interface. 
By default when DHCP snooping is enabled on a VLAN, all untagged VLANs that are on that port are set 
as untrusted. 
 
Question: 2 
   
Refer to the exhibit. 
 
 
A network administrator wants to add the protections of root guard to the network. Based on the 
spanning tree topology, on which ports should the network administrator implement root guard? 
 
A. 3-24 
B. 1 and 2 
C. A1 and A2 
D. 2 and A3 
 
Answer: C     
 
Question: 3 
   
 
The implementation plan for AOS-Switches calls for them to implement port-based tunneled node. The 
Aruba Mobility Controllers that will support the AOS-Switches run software 8.1. The controllers will also 
support APs, are managed by Mobility Master, and use clustering. 
Which issue with this plan needs to be addressed? 
 
A. The controllers cannot support tunneled node with AOS-Switches when they are managed by the 
Mobility Master. 
B. The switches cannot connect to controllers that also support APs. 
C. The controllers must have their software updated before they can support the switches. 
D. The switches must use role-based tunneled node to work with clustering controllers. 
 
Answer: D     
 
Question: 4 
   
What is one difference between BPDU protection and root guard? 
 
A. BPDU protection works with RPVST+, RSTP, and MSTP. Root guard works with RSTP or MSTP, but not 
RPVST+. 
B. BPDU protection blocks a port if it receives any BPDU, but root guard blocks a port only if the BPDU 
indicates a better root path. 
C. BPDU protection is typically implemented on edge ports, but root guard is typically implemented on 
uplinks with the root port role. 
D. BPDU protection drops BPDUs received on a port, but does not block the port. Root guard blocks the 
port if it receives a BPDU. 
 
Answer: B     
 
References: 
Question: 5 
   
Refer to the exhibit. 
 
 
The exhibit shows configurations for interface 5 and VLAN 20. Note that DHCP snooping and ARP 
protection are also enabled. 
A network administrator finds that interface 5 on an AOS-Switch is disabled. The administrator re-
enables the interface, but it shuts down again. What should the administrator investigate? 
 
A. a device that sends too much unicast traffic 
B. rogue DHCP server 
C. a loop on the interface 
D. a device that sends unauthorized ARP messages 
 
Answer: C     
 
Question: 6 
   
Refer to the exhibit. 
 
 
Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The 
network administrator sees that both switches show this interface as up. The administrator sees the 
output shown in the exhibit on Switch-1. 
What is a typical issue that could cause this output? 
 
A. asymmetric routing introduced by a routing protocol 
B. an issue with VLAN mismatch 
C. mismatched subnet mask on the VLAN for the link 
D. a jumbo frame mismatch 
 
Answer: A     
 
Question: 7 
   
What is a reason to implement PIM-DM as opposed to PIM-SM? 
 
A. to control exactly which multicast groups are routed through the network 
B. to permit a higher density of RP routers in the network core 
C. to conserve bandwidth over WAN links 
D. to use on high-bandwidth routed connections 
 
Answer: D     
 
Question: 8 
   
An AOS-Switch enforces 802.1X. It receives an Access-Accept with this HPE VSA from its Radius server: 
Attribute Name and ID = HPE-User-Role (25) Value = contractor 
The switch then rejects the client. What is one requirement for the switch to accept the message and 
authorize the client? 
 
A. The initial user role must be set to the factory default permit any role. 
 
B. User role authorization must be enabled globally on the switch. 
C. An aaa authentication local user group must have the contractor name. 
D. The RADIUS server settings must permit dynamic authorization. 
 
Answer: D     
 
Question: 9 
   
Network administrators need to configure a BGP neighbor on an AOS-Switch. What defines the neighbor 
as an iBGP neighbor? 
 
A. It has BGP synchronization enabled. 
B. It has an AS number in the range of 64512 to 64535. 
C. Its update source is set to a private company IP address. 
D. Its remote-AS is the same as the AOS-Switch BGP AS. 
 
Answer: D     
 
Question: 10 
   
Refer to the exhibits. 
Exhibit 1 
 
 
Exhibit 2 
 
Exhibit 1 shows the topology for the network. The network administrator sees the log entries shown in 
Exhibit 2. Which type of failure is indicated? 
 
A. A link between Switch-1 and Switch-2 went down. BFD detected the lost connectivity and behaved as 
expected. 
B. Graceful restart helper was not enabled on Switch-2, so BFD was unable to operate correctly, and the 
session was taken down. 
C. A hardware issue caused a unidirectional link; BFD detected the issue at Layer 2 and prevented a 
broadcast storm. 
D. BFD was set up incorrectly on Switch-2, so it caused Switch-2 to lose adjacency with Switch-1 rather 
than repair the session. 
 
Visit us athttps://www.examsboost.com/test/hpe6-a45/
 
Answer: D     
 
Question: 11 
   
A company has AOS-switches, Aruba ClearPass, and Aruba AirWave. A network administrator needs to 
find the source of a performance issue that often occurs at the start of the day and early in the 
afternoon. Which action is likely to give the administrator the most useful information for the 
investigation? 
 
A. Access the Network Device view on ClearPass. 
B. Use the configuration audit tool on AirWave. 
C. View the current running config on each switch. 
D. View usage patterns on the switches on AirWave. 
 
Answer: A     
 
Question: 12 
   
Refer to the exhibits. 
Exhibit 1 
 
Exhibit 2 
 
 
Network administrators are alerted to high interface utilization on a switch by a management solution. 
They examine the utilization on the uplink interfaces several times an hour during problem times. The 
exhibit shows output typical of times of congestion. The administrators want to allocate bandwidth 
fairly and reduce congestion on the uplinks. 
What could help meet these requirements? 
 
A. a per-queue rate limit on interfaces 1 and 2 
B. an outbound rate limit on each edge port 
C. a broadcast rate limit on each edge port 
D. an outbound rate limit on interfaces 1 and 2 
 
Answer: C