Cisco200-310 Exam Guide200-310 Dumps PDF | Dumps4download.com
                     CISCO 200-310 Exam Dumps
Designing for Cisco Internetwork Solutions
For more info:
https://latest-exam-dumps-study-material.blogspot.com/2019/05/new-200-310-dumps-questions-effective.html
 
Question: 1 
   
Which option is one of the methods that Cisco routers and switches can use to share information 
between directly connected devices on a regular basis? 
 
A. NetFlow 
B. ARP 
C. NHRP 
D. CDP 
 
Answer: D     
 
 
Question: 2 
   
 While designing a highly resilient infrastructure, which layer is typically a single point of failure? 
 
A. internet 
B. WAN 
C. distribution 
D. access 
 
Answer: D     
 
 
Question: 3 
   
Which route source has a lower administrative cost than BGP? 
 
A. RIP 
B. a connected interface 
C. OSPF 
D. an IBGP route 
 
Answer: B     
 
 
Question: 4 
   
 
An engineer is designing a Cisco Unified Communications deployment for a customer with small sites 
across the country. Which deployment model keeps the call control at the data center of the primary 
site? 
 
A. campus deployments 
B. distributed deployment 
C. multisite deployment model with centralized call processing 
D. cloud hybrid service deployment 
 
Answer: C     
 
 
Question: 5 
   
A small business owner has 200 staff members that occupy two floors of a building The owner wants to 
reduce the network infrastructure costs without losing too much network resiliency and scalability 
Which action meets these requirements? 
 
A. Combine access and core layers into one layer and keeping all other layers 
B. Combine access and distribution layers into one layer and keep all other layers 
C. Exclude access and distribution layer switches and connect everything to redundant core switches 
D. Combine core and distribution layers into one layer and keep all other layers. 
 
Answer: A     
 
 
Question: 6 
   
Which key feature does a modular design approach provide? 
 
A. performance 
B. manageability 
C. efficiency 
D. fault isolation 
 
Answer: A     
 
 
Question: 7 
   
An organization must decide which routing protocol to use throughout its network. If routing is 
performed at the access layer, which factor must the organization consider? 
 
 
A. reduced network scalability when introducing numerous switch blocks into the routing table 
B. centralized management of ACLs at the distribution layer 
C. reliability when implementing routing over STP at the access layer 
D. performance differences between core, distribution, and access layer equipment 
 
Answer: D     
 
 
Question: 8 
   
When designing enterprise networks, which two elements help to achieve IP routing efficiency? (Choose 
two) 
 
A. using two different IGP protocols 
B. supernettmg 
C. static routing 
D. hierarchical addressing 
E. dynamic IP addressing 
 
Answer: BE     
 
 
Question: 9 
   
Which statement about route summarization is true? 
 
A. Summarization is supported by every routing protocol 
B. EIGRP can be configured to automatically summarize VLSM networks. 
C. When it is implemented routing tables are smaller 
D. ACLs can be applied to automatically summarize routes. 
 
Answer: D     
 
 
Question: 10 
   
Which two features are benefits of a modular network design"? (Choose two ) 
 
A. higher scalability 
B. intelligent network services 
C. ease of troubleshooting 
 
D. end-to-end security 
E. improved fault isolation 
 
Answer: AD     
 
 
Question: 11 
   
Cisco Unified Wireless networks support two campus design models Centralized or Local Mode and 
Cisco FlexConnect Which statement about the Local Mode design model is true? 
 
A. The wireless LAN controller and access points are co-located. 
B. It is recommended for remote-site deployments. 
C. It is recommended for sites that use less than 50 Aps. 
D. It is recommended for sites with a local WAN distribution layer. 
 
Answer: A     
 
 
Question: 12 
   
An engineer must design a new data center network and must reduce hardware costs while allowing for 
the benefits of a hierarchical network model. Which layer is combined with the distribution layer by a 
single device to accomplish this goal? 
 
A. campus 
B. access 
C. DMZ 
D. core 
 
Answer: A     
 
 
Question: 13 
   
What is a benefit of deploying Cisco IPS devices in inline mode? 
 
A. faster network convergence 
B. decreased network latency 
C. improved service availability 
D. timely threat detection 
 
 
Answer: C     
 
 
Question: 14 
   
Which two characteristics are advantages of the top-down approach to network design? (Choose two) 
 
A. Generally is the fastest approach 
B. The resulting design is optimized for the business requirements of the organization. 
C. The designer can delay testing until the end of the project 
D. The resulting design can meet both current and future requirements 
E. Does not require a throuough initial need analysis 
 
Answer: BE     
 
 
Question: 15 
   
Which two types of files are the most common used in APIs for programmabtlity? (Choose two.) 
 
A. HTML 
B. PERL 
C. BASH 
D. JSON 
E. XML 
 
Answer: AE     
 
 
Question: 16 
   
Which advantage of using Spanning Tree Protocol is true? 
 
A. utilizes all available uplink bandwidth 
B. allows fast convergence after failure of a link or device 
C. allows dual-homed servers operate in active-active mode 
D. prevents network loops 
 
Answer: D     
 
 
 
Question: 17 
   
A customer is questioning the additional infrastructure that is needed to design a three-tiered, 
hierarchical network. Which feature is a benefit of the distribution layer In a traditional design? 
 
A. creates access layer resiliency 
B. isolation of faults between the access and core layers 
C. extends the Layer 2 and Layer 3 boundary to the core layer 
D. provides additional security services against unauthorized access 
 
Answer: B     
 
 
Question: 18 
   
An engineer must build an enterprise network that can operate with a limited amount of employees. In 
which two ways can the engineer use the Cisco Design Lifecycle? (Choose two.) 
 
A. Amanage 
B. share 
C. learn 
D. operate 
E. build 
 
Answer: AC     
 
 
Question: 19 
   
Which type of WAN connection do you use for a low-latency application that is only available across a 
WAN? 
 
A. IPsec over the Internet 
B. MPLS VPN 
C. dialup 
D. unencrypted GRE over the Internet 
 
Answer: B     
 
 
 
Question: 20 
   
A customer is deploying a centralized communications infrastructure to a small remote construction site 
that has sateilite-based Internet connectivity if the expected latency is about 500 ms, which description 
of the user experience is true? 
 
A. minimal delay and conversation overlap 
B. Phones will not complete registration to the centralized cluster 
C. significant delay and conversation overlap 
D. no delay or conversation overlap 
 
Answer: D     
 
 
Question: 21 
 
DRAG DROP   
Drag the spanning-tree protocol on the left to the recommended deployment environment on the right. 
 
Answer:  
 
 
 
Question: 22 
 
What occurs to traffic when a Cisco APIC is removed from the data path of a Cisco ACI? 
 
A. The fabric continues to forward the traffic. 
 
B. The traffic is lost during convergence 
C. The traffic is queued during convergence 
D. The fabnc reroutes the traffic to another APIC 
 
Answer: A     
 
 
Question: 23 
   
Which network size can provide six /25 subnets while wasting the smallest number of IP addresses? 
 
A. 19 
B. 16 
C. 22 
D. 23 
 
Answer: D     
 
 
Question: 24 
   
Which feature enables the VRRP-enabled router to regain the master VRRP status upon recovery from a 
failure? 
 
A. tracking 
B. preemption 
C. delay 
D. priority 
 
Answer: A     
 
 
Question: 25 
   
Refer to the exhibit. 
 
Which result is true if a client computer connects through the interface named Internal and attempts to 
connect to an operational tcp/443 based website? 
 
 
A. A captive portal is displayed which enables guest access layer. 
B. The traffic passes while alerting the logging system with the Emergencies event level. 
C. The traffic passes and displays the website content. 
D. The website connection times out 
 
Answer: A     
 
 
Question: 26 
   
Which network element must be summarized in a multiarea OSPF deployment? 
 
A. IP address 
B. number of routes 
C. communities 
D. link state advertisements 
 
Answer: A     
 
 
Question: 27 
   
Drag the descriptions on the left to the matching design category on the right. 
 
Answer:  
 
 
Question: 28 
 
 
An engineer is designing a new modular network topoiogy. What is one advantage to using a 
hierarchical design? 
 
A. It supports unequal cost paths. 
B. It provides additional fault tolerance. 
C. It enables the network to scale. 
D. It manually controls failover. 
 
Answer: D     
 
 
Question: 29 
   
Based on best practices which QoS profile should be configured on the WLAN of the WLC for wireless 
VoIP communications? 
 
A. Platinum 
B. Bronze 
C. Silver 
D. Gold 
 
Answer: A     
 
 
Question: 30 
   
When designing a high availability network, which option can be classified as a fault domain? 
 
A. single power supply devices in a network design 
B. nonredundant devices in the network design 
C. every tier in the network design 
D. collapsed core in a network design 
 
Answer: C